TODC-P series dust collector is the first in the world to use gravity and downward air flow pattern to promote the self-purification process, dusty air enters the air from the top, and then out from the top of the other side, the design realizes the dust flow pattern downward “inertia settlement” dust removal principle, but also makes the dust-carrying gas flow direction consistent with the gravity direction, so that the dust is easier to settle and remove, and will not be brought back to the filter cartridge.
During the operation of the dust collector, the dusty air enters the DFT dust collector from the top inlet, through the filter cartridge, the dust is captured on the outer surface of the filter cartridge, and the clean air is released into the clean air chamber through the center of the filter cartridge, and then discharged through the outlet. When the filter cartridge is cleaned, the solid-state control timer will automatically select a pair of filter cartridges for dust removal, so the high-pressure compressed air will rush directly into the center of the filter cartridge and blow off the dust on the surface of the filter material. The dust follows the main air flow and falls down into the ash bucket under the action of gravity.The sunken flow method can eradicate the problem of secondary cleaning and improve the efficiency of dedusting.
Configuration
TODC-12P/18P/24P
Controller
Independent R&D
HMI
LCD
Backflush valve
Pulse control
Filter
HV/Ahlstrom/TORAY / SBFEC
Protocol
EtherCAT
Energy saving(optional)
Inverter control
Technical Parameters
TODC-12P
TODC-18P
TODC-24P
Filter material
HV/Ahlstrom/TORAY，F9
Number of Filter
12
18
24
Air volume
10000m3/h
12000m3/h
16000 m3/h
Filtration efficiency
99.99%
99.99%
99.99%
Filtering area
120M2
180M2
240M2
Air Blower
15KW Motor
18.5KW Motor
22KW Motor
Collector capacity
120L
120L
240L
Power requirements
THREE-PHASE FOUR-WIRE，380V
Air pressure request
0.6~0.7MPa, compressed air without oil and water
Unit weight
1800KG
2100KG
2300KG
Outline Dimension(mm)
A：2725，B：2215，
C：2117
A：3696，B：2215，
C：2194
A：4439，B：1950，
C：2852
Emission concentration（mg/M3）
<10
<10
<10
Our dust collector has the following other advantages:
4.1.1 Dust collector shell:
The standard structure is made of No. 7 (5mm thick) and No. 10 steel (4mm thick). Through reinforcement, the design can withstand up to-20 inch water column (5000pa).
4.1.2 Filter cartridge bracket
Galvanized steel, unique triangular design structure, in line with the principle of mechanics; take and put the filter cartridge is convenient and simple, automatically adjust the reasonable position of the filter cartridge, so that the filter cartridge is more safe and accurate fixed in the dust removal. The screw rotation design at the top makes the filter cartridge, the filter cover and the dust collector shell strongly combined, excellent sealing performance to ensure that dusty air will not be leaked to the clean air side. The tilt under the bracket is 15 degrees, which is convenient for the filter cartridge to slip during maintenance.
4.1.3 Filter cartridge cover
The cover is a stamping molding, through the electrophoretic painting technology, the protective paint is evenly arranged on the surface of the bucket cover, ensuring that the thickness is the same, strong and beautiful, and the phenomenon of paint or bubbles will not appear within 10 years, the triangular plastic installation handle of the end cover, humanized design, can quickly rotate to install the filter cover.
4.1.4 Filter cartridge
the filter cartridge has a long service life and excellent dust collection and dust removal capacity, it is rare to require the replacement of the filter cartridge.
I LASER is a professional supplier of laser equipment and accessories, mainly engaged in laser marking machines, laser welding machines, laser cleaning machines, laser cutting machines and supporting accessories.
Longgang District, Shenzhen City, Guangdong Province
English
Arabic
Reviews
There are no reviews yet.